transfer foil gel

Using foil gel typically involves the following steps:

1. Preparation: Ensure your nails are clean, dry, and free from any old polish or oils. Lightly buff the surface of your nails to create a smooth base.
2. Base Coat: Apply a thin layer of clear or colored base coat and cure it under a UV or LED lamp according to the manufacturer’s instructions. This provides a sticky surface for the foil gel to adhere to.
3. Apply Foil Gel: Use a gel brush or an applicator to apply a thin, even layer of foil gel over your nails. Ensure you cover the entire nail surface evenly.
4. Cure: Cure the foil gel layer under a UV or LED lamp as per the gel’s curing instructions. This step is crucial to ensure the gel hardens and adheres properly to the nail.
5. Application of Foil: Once cured, gently press a piece of foil (shiny side up) onto the tacky surface of the cured foil gel. Press firmly and smooth out any wrinkles or air bubbles.
6. Peel Off: Carefully peel away the foil sheet from the nail. The foil will adhere to the tacky gel surface, leaving behind a decorative pattern.
7. Top Coat: Seal the design with a layer of clear top coat gel. Cure it under the UV or LED lamp to ensure a long-lasting finish and to protect the foil design.
8. Final Cure: Finally, cure your nails once more under the lamp to fully set the top coat and foil design.
9. Clean Up: Clean up any excess gel or foil residue around the edges of your nails using a nail cleanser and lint-free wipe.

Always follow the specific instructions provided by the manufacturer of the foil gel you are using for the best results.